liquid polymerization
英 [ˈlɪkwɪd ˌpɒliməraɪˈzeɪʃn]
美 [ˈlɪkwɪd ˌpɑːlimərəˈzeɪʃn]
网络 液相聚合法; 液相聚合
双语例句
- Steady-state modeling of commercial liquid phase bulk propylene polymerization
工业丙烯液相本体聚合过程的稳态模拟 - A method to determine content of perfluoropropyethyl ether in the liquid latex and polymerization mother liquid by gas chromatogram is studied.
研究了用气相色谱测定水基乳液及共聚母液中全氟丙基乙烯基醚含量的方法。 - Evaluation of Productive Capacity of the Reactor for Liquid Phase Polymerization of Olefins
烯烃液相聚合釜生产能力的评价 - Valve and pipeline was easily jammed or blockaded by the viscous low isotactic polypropylene produced in a process of liquid phase bulk polymerization during the stages of discharge, transportation, separation and recovery.
采用液相本体法生产的粘性低等规聚丙烯在排放输送和分离回收时易堵塞阀门和管道。 - Monomer casting nylon ( MC nylon) composites reinforced by carbon fibers ( CF) are prepared by liquid insitu polymerization, and their moisture absorption behaviors are studied.
采用液态原位聚合法制备了碳纤维（CF）增强浇铸尼龙（MC尼龙）复合材料，研究了其吸湿行为。 - Several measures were implemented to solve problems such as high energy and material consumption and low product yield of liquid phase bulk polymerization unit in Henan Oil Refinery.
针对液相本体法聚丙烯装置能耗高、物耗高、产品收率低等问题，通过摸索，采取了一系列措施。 - Study on Modifying Epoxy Resin with Liquid Crystalline Epoxy by in-situ Polymerization
原位聚合液晶环氧改性环氧树脂的研究 - Liquid Phase Bulk Polymerization of Propene in Presence of SC Highly Efficient Catalyst
SC型高效催化剂丙烯液相本体聚合 - Industrial Liquid Phase Bulk Polymerization of Refinery Propylene
炼厂丙烯的液相本体聚合工业试验 - A comprehensive model for liquid phase bulk propylene polymerization was developed by using polymers plus of ASPEN.
依据聚合反应机理，采用ASPEN公司的POLYMERSPLUS为软件平台，对Hypol工艺的丙烯液相本体聚合过程进行建模与流程模拟。 - Composition, particle size distribution and catalytic performance of NA catalyst in batch liquid bulk polymerization of propylene were studied and were compared with those of an imported catalyst.
研究了用于丙烯聚合的新型NA催化剂的组成、粒度分布及本体聚合性能，同时与进口催化剂进行了相关对比。 - Two new processes, low temperature liquid polymerization process and leaching with solvent TE, were developed to produce insoluble sulphur.
开发了低温液相法&浸取剂TE浸取制备不溶性硫磺新工艺。 - The new process is developed through low temperature liquid polymerization to produce insoluble sulphur.
开发了低温液相法生产不溶性硫磺新工艺。 - Multi-hydroxyl polymer, CXC-1, as an anti-sloughing agent for water base drilling fluids, is a yellowish liquid and is prepared by polymerization of alkylene oxides and polyhydroxylated compounds.
多羟基聚合物防塌剂CXC-1是以环氧化物及多羟基化合物共聚而成的聚合物防塌剂，为淡黄色黏稠液体。 - Operation Optimization of Bulk Liquid Phase PP Plant Technical Transformation and Optimization of Liquid Phase Bulk Polymerization Unit
液相本体聚丙烯装置设备改造及优化 - According to the flow behavior in the loop reactor and the mechanism analysis of bulk polymerization of propylene, the micro-model for liquid phase bulk propylene polymerization in loop reactor at steady operation condition was proposed in order to determine the polymerization kinetics.
基于流体全混流流动模式并联用机理分析方法，建立了环管反应器中的丙烯液相本体聚合的微观数学模型，模拟了在稳态操作条件下环管反应器中丙烯液相本体聚合动力学。 - A novel technical development on Condensing Mode, Super Condensing Mode, Liquid Monomer Polymerization Mode and indirect cooling reactor of the process of gas-phase ethylene polymerization of was summarized.
综述了Unipol气相法聚乙烯工艺的冷凝态、超冷凝态、液体单体聚合、液体成分聚合和间接冷却反应器技术的最新进展情况。 - Optimize industry wastewater discharged of polypropylene with liquid bulk polymerization
液相本体法聚丙烯工业废水排放的优化 - Application of CS-1 High Effective Carrier Catalyst in Intermittent Liquid Phase Bulk Polymerization Plant for Polypropylene
CS-1型高效载体催化剂在间歇式液相本体法聚丙烯生产装置上的应用 - The affecting factors of the quality of PET commercial filaments are explored in terms of liquid phase polymerization, solid state polycondensation and HMLS spinning processes.
从液相聚合、固相增粘及高模低缩（HMLS）纺丝的工艺要求3个方面探索了聚酯切片质量影响HMLS涤纶工业丝性能的因素。 - Improvement of the Control of Polymerization Process for Liquid Mass Polymerization Polypropylene Unit
液相本体法聚丙烯装置聚合过程控制方案的改进 - Preparation and structure of hydroxyl carboxyl-terminated liquid polybutadiene rubber by anionic polymerization
负离子聚合法合成端羟羧基液体聚丁二烯橡胶的研究 - Comparison of direct recovery process for concentrated liquid in nylon 6 polymerization
尼龙6聚合中几种浓缩液直接回用工艺的对比 - The stereo properties of polypropylene particle produced on NA catalyst were better than that produced on imported catalyst in batch liquid bulk polymerization process.
NA催化剂本体聚合反应制备的聚合物颗粒规整性较好，表面形态更接近于球形。 - Approach to product quality of liquid-phase bulk polymerization of propylene
小本体法聚丙烯产品质量问题探讨 - The Study on Low Isotactic Polypropylene ⅱ. Interval Liquid Phase Bulk Polymerization Technology of LIPP
低等规聚丙烯的研制&Ⅱ.间歇式液相本体法聚合工艺 - Simulation for liquid phase bulk propylene polymerization in loop reactor at steady operation conditions
环管反应器中稳态操作的丙烯液相本体聚合的模拟 - Synthesis of hydrox yl-terminated butadiene-styrene liquid rubbers by anionic polymerization ⅱ. synthesis and characterization of the liquid rubbers
阴离子聚合法合成端羟基液体丁苯橡胶的研究&Ⅱ.端羟基液体丁苯橡胶的合成与表征 - The fluorescent microspheres were synthesized by Drying Method in Liquid and Polymerization Method, respectively.
分别采用液中干燥法和聚合法制备了荧光微球。